Air Pollution Control
For more info contact us
Awareness of the complexity of managing environmental aspects has led NTE Process to develop the range Air Pollution Control, consisting of:
- A process technology that combines dust filtration with control of harmful emissions for mitigating a wide range of acid pollutants (SO2, SO3, HCl and HF), heavy metals (HG, As) and dioxins in accordance with the most stringent regulations in force.
- Industrial filtration for pneumatic conveying systems and processes that requires aspiration and particilate capture.
DRY SORBENT INJECTION (DSI)
The NTE Process systems is based on DSI technology for injecting sorbents to reduce harmful emissions by offering an economical solution, easy to install, even in the case of existing systems or upgrades. DSI is also more effective than traditional technologies thanks to special injection lances – Eco-Lance® – which contribute to reduce the use of sorbents, up to 50%.
The sorbents, normally hydrated lime, sodium bicarbonate, trona, activated carbon, are continuously transferred from the storage silos to the injection lances which are strategically positioned along the fumes duct, reacting accordingly with the polluting gases and guaranteeing an effective reduction of emissions.
Consulting, CFD modeling, on-site tests with mobile units are just some of the services provided in the preliminary design phase that precedes the installation of the systems.
Furthermore, NTE Process provides a large range of solutions for conveying ashes and waste products with integrated and complete systems even for high filtration temperatures even higher than 350 ° C and handling.
BICARMILL®: EXCELLENCE IN SODIUM BICARBONATE GRINDING AND DOSING
The abatement of sulphur emissions, SO2, SO3 as well as acid emissions HF, HCl depends on the quality of the sor bent used, the precision and continuity of dosage, and above all the fineness of the sorbent injected (D50 8 microns / D90 20 microns). In fact, in contact with fumes at high temperatures, sodium bicarbonate – which is an al kaline powder – effectively neutralises the acids present in these fumes, such as Sulphur Oxides (SOx), Hydrogen Chlo ride (HCl), Hydrogen Fluoride (HF) if close contact between the particles and the harmful substances is guaranteed.
In addition, the machines used for grinding must ensure that the product is preserved, thus preventing the bicarbonate – which is subject to the temperatures resulting from grinding – from altering its characteristics.
Bicarmill® is a stand-alone machine that contains a dosing system that feeds animpact mill equipped with an integrated dynam ic classifier They are located inside a “plug and play” soundproof box equipped with PLC and remote connection. This solution represents the state of the art for the dry injection of bicarbonate from big bags, silos or hoppers.
Advantages:
- perfect control of air flows which reduces the grinding temperature to avoid damaging the product and agglomerations
- engineered geometry of the machine which guarantees low impact speeds and long life,while limiting maintenance
- integrated control of chamber temperature and vibration
- automatic greasing and cleaning system
- PLC-scheduled maintenance facilitated by ergonomic design
Through perfect control of air flows, Bicarmill® is able to maintain a specific particle size ideal for abatement with a perfect stoichiometric injection ratio at both low and high reagent flow rates. Acids in the flue gas are thus neutralised, even with pollutant peaks. Serie JCF mulino con classificatore dinamico integrato Furthermore, by maintaining a controlled working temperature, the machine does not degrade the reagent, thus bringing it to an ideal chemical reaction within the abatement process.
HYDRATED LIME OR PRE-MILLED BICARBONATE DOSING AND INJECTION
Hydrated lime Ca(OH)2 is an alternative to bicarbonate depending on the operating conditions of the various systems for controlling emissions of acidic substances (SOx, HCl and HF) in flue gas from industrial process combustion.
In addition, it does not require grinding processes since the specific grinding for abatement of harmful substances has a fineness of <20 microns. Conversely, it can be cohesive and have high hygroscopicity.
NTE Process – Grinding Division has therefore developed dosing and injection skids specifically for hydrated lime that can guarantee dosing accuracy without the use of venturi ejectors or rotary valves that could be prone to clogging, but by using a fan directly connected to the special dosing outlet specially designed to inject continuously directly into the flue gas duct. These systems are also completely pre-assembled and pre-wired for rapid field installation under big bag, silos or hopper unloading stations.
This experience has given rise to stations with similar characteristics that can dose and inject ground bicarbonate (which does not require the use of micronising mills). This solution is particularly suitable when consumption is limited and storage silos are not needed.
DOSING AND INJECTION OF ACTIVATED CARBON
Powdered activated carbon is used in fossil-fuelled plants to control emissions of heavy metals such as mercury (Hg), dioxins and furans that develop in industrial processes. NTE Process -Grinding Division has a wide range of dosing products such as loss-in-weight, volumetric, twin screw and/or multiple output feeders.
The dosing skid is integrated with a pneumatic conveying system of activated carbons, brominated and non-brominated, based on a Venturi ejector, which guarantees a slight vacuum at the loading mouth, to avoid the leakage typical of rotating valves, and continuity of injection into the flue gas duct. The skid can be equipped with a pre-assembled and pre-wired on-board control panel to ensure installation with minimal field operations. All activated carbon systems are available with Atex marking and can be installed under big bag, silos or hopper unloading stations.
Activated carbon dosing and propulsion in streaming gas often require a few hundred grams of continuous injection dosing, and due to the low specific gravity and particle cohesion of the material, this can lead to dosing failures. This is why NTE Process – Grinding Division installs a weighing platform on its reagent dosing systems to control injection quantity and uniformity, with automatic flow rate adjustment via a loss-in-weight system.
Want to know more about this solution?
Download the brochure